Parts and applications
What is a magnetic isolation sleeve and how is it made?
Answer
Deep Draw Metal Stamping Precision Metal Stamping Industries Served Solenoid / Valve Automotive Engineering & Quality Considerations Thin-wall deep drawing requires controlled wall-thickness distribution to keep magnetic performance consistent. Concentricity and roundness are held to drawing requirements and verified with inspection reports. Surface condition is managed to avoid defects that could affect the magnetic circuit or sealing. Selected Case Studies Real projects from Balford's production history: Deep Drawn Magnetic Isolation Sleeve Stainless Steel Sleeve For Solenoid Valve FAQ What material is used for magnetic isolation sleeves?
Sources
- Deep Drawn Magnetic Sleeve Manufacturer | BalfordHome › Applications › Magnetic Sleeve Custom Deep Drawn Magnetic Sleeves Balford manufactures deep-drawn magnetic isolation sleeves in stainless steel for solenoid valves and electromechanical devices, with controlled wall thickness and concentricity. Send Your Drawing Request a Manufacturing Review...
- Deep Drawn Magnetic Sleeve Manufacturer | BalfordDeep Draw Metal Stamping Precision Metal Stamping Industries Served Solenoid / Valve Automotive Engineering & Quality Considerations Thin-wall deep drawing requires controlled wall-thickness distribution to keep magnetic performance consistent. Concentricity and roundness are held to drawing require...
- Best Deep Drawn Metal Parts Suppliers in 2026: The Buyer's Shortlist | BalfordDraw ratios and lubricants differ from steel — demand a trial result What results look like Rankings and certifications are claims. These are the parts. Each case below is a component we actually produced, with the drawing parameters that made it difficult. Deep drawn magnetic isolation sleeve Deep ...
- Stainless Steel Wheel Speed Sensor Housing Manufacturer | BalfordDeep Drawn Magnetic Isolation Sleeve Precision Stamped Stainless Steel Nut Washer Stainless Steel Housing For Abs Wheel Speed Sensor FAQ Frequently asked questions Are automotive sensor housings made of stainless steel? In Balford's catalogue, almost all of them are. The housing has to survive coola...
- Electronics Components Manufacturer | Precision StampingDeep-Drawn Magnetic Isolation Sleeve Material: Stainless steel (thin gauge) Process: Deep drawing 0.1–0.3 mm disc Application: Magnetic isolation sleeve for solenoid valves; thin-wall tolerance control. Manufacturing Capabilities by Part Type Part Type Typical Process Route Key Requirements IGBT / p...
- Metal Parts Stock & Samples | BalfordALUMINUM METAL STAMPING 6061 Reference Part View Case Study → Solenoid Valve Deep-drawn Magnetic Isolation Sleeve • Balford Precision deep-drawn magnetic isolation sleeves for OEMs. Custom sizes, tight tolerances, DFM review. Get a quote from Balford today. STAINLESS STEEL DEEP DRAWING 304 Sam...
What an engineer still needs from you
- material and material condition (grade, temper)
- material thickness, plus the key diameter, height and wall thickness
- tolerances, burr direction and the visual acceptance standard
- annual volume - it decides whether tooling is single-hit, progressive or transfer
- surface finish, and any secondary machining, annealing or plating
Need a DFM feasibility assessment for your project?
Send the engineering drawing (STEP or PDF) with the material grade, thickness and annual volume. Balford engineers then check it against the process window - draw ratio, wall thickness, tolerances, blank and tooling route - and come back with what is feasible and what is not. An answer on this page cannot replace that review.
Upload a drawing for DFM reviewHow the DFM review worksRelated questions
- How is a solenoid valve housing manufactured?
- How should I compare materials for a solenoid valve housing?
- What wall thickness should a deep drawn sensor housing use?
- How are motor housings and end caps stamped?
- How are custom shims, washers and spacers specified?
- What components make up a fuel metering valve?
This page is an engineering answer, not a quotation and not a dimensional acceptance. It is generated from Balford's published material and held to the verified company fact sheet.