Heat treatment and surface finishing
What is the difference between powder coating and e-coating?
Answer
Zhuji, Zhejiang, China Zhejiang Dongsheng Technology Co., Ltd. — electrophoretic coating plant in Ciwu Town, Zhuji, on the same industrial patch as Balford. Automatic e-coating line with its own control room. View Supplier → WHERE IT FITS Where E-Coating Fits E-coat is a corrosion-protection layer rather than a decorative finish.
Sources
- E-Coating Partner | Electrophoretic Coating | BalfordHome › Support › Supplier Network › Surface Treatment › E-Coating SUPPLIER PROCESS · SURFACE TREATMENT E-Coating (Electrophoretic Coating) Cathodic electrophoretic coating — e-coat, also written EPD — applied by an audited partner. The paint is deposited electrically instead of sprayed, so cut edges...
- E-Coating Partner | Electrophoretic Coating | BalfordZhuji, Zhejiang, China Zhejiang Dongsheng Technology Co., Ltd. — electrophoretic coating plant in Ciwu Town, Zhuji, on the same industrial patch as Balford. Automatic e-coating line with its own control room. View Supplier → WHERE IT FITS Where E-Coating Fits E-coat is a corrosion-protection layer r...
- Zhejiang Dongsheng Technology | E-Coating Partner | BalfordIs e-coating the same as powder coating? + No. E-coat is a wet electrophoretic process and normally thinner; powder coating is applied dry and cured. They are often used together, with e-coat as the corrosion layer and powder as the colour and durability layer. Powder coating of large sheet-metal pa...
- Surface Treatment Suppliers | Balford Supplier NetworkHome › Support › Supplier Network › Surface Treatment SUPPLIER CATEGORY · SURFACE TREATMENT Surface Treatment Suppliers Partners for surface treatment partners for corrosion resistance, appearance and functional surface performance. Every partner is evaluated on process capability, quality consisten...
- Zhejiang Dongsheng Technology | E-Coating Partner | BalfordHome › Support › Supplier Network › Surface Treatment › E-Coating › Zhejiang Dongsheng Technology SURFACE TREATMENT · E-COATING Zhejiang Dongsheng Technology Zhejiang Dongsheng Technology Co., Ltd. — electrophoretic coating plant in Ciwu Town, Zhuji, Zhejiang, on the same industrial patch as Balford...
- Verified company facts and boundariesoutsourced_processes: ["bulk heat treatment (die + production parts)","slow-wire EDM","passivation","electropolishing","plating","phosphating","liquid painting","electrophoretic coating / e-coating (电泳)","hot forging 红冲 (machining pre-forms)","cold extrusion 冷挤压 (machining pre-forms)","cold heading ...
What an engineer still needs from you
- material and material condition (grade, temper)
- material thickness, plus the key diameter, height and wall thickness
- tolerances, burr direction and the visual acceptance standard
- annual volume - it decides whether tooling is single-hit, progressive or transfer
- surface finish, and any secondary machining, annealing or plating
Next step. Send the drawing for a manufacturability review, or send the part data for a process and cost route.
Submit a drawing / RFQDFM review
Submit a drawing / RFQDFM review
Related questions
- What is annealing and why is it needed after deep drawing?
- What is magnetic annealing and when is it required?
- Passivation, electropolishing or plating: which surface treatment should I specify?
- What zinc plating and salt spray performance is available?
- Which processes are outsourced, and how are they controlled?
This page is an engineering answer, not a quotation and not a dimensional acceptance. It is generated from Balford's published material and held to the verified company fact sheet.