Materials
Can titanium be stamped or deep drawn?
Answer
Case study Grade Raw material as specified Solenoid Valve Housing for Air Suspension DT4E DT4E pure iron Solenoid Valve Magnetic Housing DT4E DT4E pure iron Stamped Metal Brackets for Date Printer Gun DT4E pure iron (dt4/dt4a/dt4e/dt4c) 3 cases on this page. What We Manufacture Nickel-Based Alloy Parts Grades we will evaluate on request include Inconel 625 and 718, Monel 400 and Hastelloy C276. Evaluation means we review material availability, forming or machining feasibility and tooling before quoting — it is not a claim of routine production volume.
Sources
- Special Alloys | Nickel & Titanium Deep Drawing | BalfordCase study Grade Raw material as specified Solenoid Valve Housing for Air Suspension DT4E DT4E pure iron Solenoid Valve Magnetic Housing DT4E DT4E pure iron Stamped Metal Brackets for Date Printer Gun DT4E pure iron (dt4/dt4a/dt4e/dt4c) 3 cases on this page. What We Manufacture Nickel-Based Alloy Pa...
- Special Alloys | Nickel & Titanium Deep Drawing | BalfordBalford treats these grades as project-qualification work rather than stock, forming and machining trial parts on the same 25 t to 350 t press range used for production. Material Grades Nickel-based: Inconel 625, Inconel 718, Monel 400, Hastelloy C276 Titanium: TA1 (Grade 1), TA2 (Grade 2), TC4 (Ti-...
- Metal Fabrication & Stamping Blog | BalfordCNC Turning Custom Machined Parts Manufacturer: From Drawing to Production Balford manufactures custom machined parts in China, including precision turned components, engineered fasteners, fittings, finishes and assembly support. Read Article → Deep Draw Stamping The Difference Between TA1 and TA2 T...
- Metal Stamping Materials: Stainless, Carbon Steel, CopperTypical applications: Shielding cans, conductive parts, heat-dissipation structures, battery connectors View Copper Capability → 05 / ALUMINUM MATERIAL — ALUMINUM Aluminum We cover pure aluminum through mid-strength alloys, balancing lightweight and formability for weight-sensitive structures and en...
- Materials Catalogue — All 54 Grades We Form | Balfordgalling risk in forming — TA2 UNS R50400 · GB TA2 Ti balance · Fe ≤0.30 · O ≤0.25 Rm ≥345 MPa · Rp0.2 ≥275 MPa · A ≥20% Sheet MC · PR Medical and chemical parts Needs warm forming for deeper shapes; tool wear — TC4 UNS R56400 · GB TC4 Ti balance · Al 5.5–6.75 · V 3.5–4.5 Rm ≥895 MPa · Rp0.2 ≥828 MPa...
- Deep Draw Stamping Articles | BalfordThe Advantages and Process of Deep Drawing Aluminum Parts Aluminum is one of the most requested materials for deep-drawn parts, and for good reason. It offers a strong strength-to-weight ratio, natural corrosion resistance, and excellent formability when you select the right alloy and temper for the...
What an engineer still needs from you
- material and material condition (grade, temper)
- material thickness, plus the key diameter, height and wall thickness
- tolerances, burr direction and the visual acceptance standard
- annual volume - it decides whether tooling is single-hit, progressive or transfer
- surface finish, and any secondary machining, annealing or plating
Need a DFM feasibility assessment for your project?
Send the engineering drawing (STEP or PDF) with the material grade, thickness and annual volume. Balford engineers then check it against the process window - draw ratio, wall thickness, tolerances, blank and tooling route - and come back with what is feasible and what is not. An answer on this page cannot replace that review.
Upload a drawing for DFM reviewHow the DFM review worksRelated questions
- Which carbon steel grades are used for stamped parts?
- Which stainless steel grade should I choose: 301, 304, 316L or 430?
- Is stainless steel magnetic?
- What is DT4E pure iron and why is it used for solenoid housings?
- What are 1J50 and 1J79 soft magnetic alloys used for?
- Which aluminium grades deep draw well?
This page is an engineering answer, not a quotation and not a dimensional acceptance. It is generated from Balford's published material and held to the verified company fact sheet.