免费工程工具

折弯余量和折弯扣除计算器

使用折弯余量、折弯扣除和K因子计算折弯钣金件的展开长度，适用于空气折弯和压底折弯。支持L形和U形以及K因子反算。

1 · Mode

2 · Material & K-Factor

K-factor (0….5 typical)

Air bending: mild steel 0.33 · stainless 0.35 · aluminium 0.33. Bottoming: add 0.05….10.

Sheet Thickness t

Inside Radius R

Bend Angle α

3 · Shape & Flange Lengths (to bend intersection)

Leg 1

Leg 2

Measure flange lengths to the bend intersection (mold line), not to the outside of the bend.

Flat Pattern Length

75.75 mm50 + 30 −BD = 75.75 mm

Bend Allowance BA

5.75 mmneutral-axis arc through the bend

Bend Deduction BD4.25 mm2×OSSB −BA

Outside Setback OSSB5 mm(R + t) × tan(α/2)

K-factor used0.33neutral axis / t

V-die suggestionV-die opening ≤?16 mm8T rule

Geometry within recommended limits for this material.

Geometric values only …"springback is not modelled. Confirm with a first-article bend; typical overbend compensation is 2…° for mild steel, 5–0° for stainless and 5…° for aluminium. See DIN 6935, ISO 7438 and Machinery's Handbook.

需要金属零件的生产报价？

将您的图纸发送至 shawn@balford.net——我们的工程师将在24小时内确认材料牌号、毛重、机加工和价格。