Stainless Steel Sleeve for Solenoid Valve – 304
What is this part? Stainless Steel Sleeve for Solenoid Valve is a Sleeve manufactured from 304 stainless steel by Balford. Production process: Deep Drawing → Heat Treatment → Surface Treatment. Finish: Brightened, applied after Annealing. Key requirements: Flange formed with a tight radius to seat the sealing ring; inner diameter held to plug gauge tolerance; burr-free ends; 100% inspection before shipment.
Deep Draw Metal Stamping
| Product Name | Stainless Steel Sleeve for Solenoid Valve |
|---|---|
| Category | Sleeve |
| Process Flow | Deep Drawing→Heat Treatment→Surface Treatment |
| Material | 304 stainless steel |
| Surface Treatment | Brightened |
| Heat Treatment | Annealing |
| Key requirements | Flange formed with a tight radius to seat the sealing ring; inner diameter held to plug gauge tolerance; burr-free ends; 100% inspection before shipment |
Case Review
The magnetic sleeve sits between the armature and the electromagnetic coil in the solenoid assembly. It isolates the armature from the coil field while letting the armature slide freely inside the bore. This solenoid valve's magnetic sleeve is deep drawn from 304 stainless steel. The flange is formed with a tight radius to seat the sealing ring properly. The inner diameter is held to plug gauge tolerance, and a shaft passes through it during operation.
